Search results for "Vinyl acetate"

showing 10 items of 48 documents

Kinetics of vinyl acetate biodegradation by Pseudomonas fluorescens PCM 2123

2018

Abstract The microbial degradation of vinyl acetate (VA) by Pseudomonas fluorescens PCM 2123 strain was studied in both batch and continuous modes. The purpose of the experiments was to determine the kinetic model of the cell growth and biodegradation rate of vinyl acetate (VA), which was the sole carbon and energy source for tested microorganisms. The experiments, carried out in a batch reactor for several initial concentrations of growth substrate in the liquid phase ranging from 18.6 to 373 gsubstrate·m−3 (gs·m−3) made it possible to choose the kinetic model and to estimate its constants. The Haldane inhibitory model with the values of constants: μm = 0.1202 h−1, KS = 17.195 gs·m−3, Ki =…

0301 basic medicineEnvironmental Engineeringbiology030106 microbiologyKineticsPseudomonasPseudomonas fluorescens010501 environmental sciencesBiodegradationbiology.organism_classification01 natural sciencesbatch and continuous cultures03 medical and health scienceschemistry.chemical_compoundchemistrykineticsPseudomonasVinyl acetateBioreactorvinyl acetateEnvironmental ChemistryMicrobial biodegradation0105 earth and related environmental sciencesNuclear chemistryvinyl acetate; Pseudomonas; kinetics; batch and continuous cultures
researchProduct

Prediction of Maxwell – Stefan diffusion coefficients in polymer – multicomponent fluid systems

2014

Abstract Calculations of mass fluxes in multicomponent fluids based on the system of generalized Maxwell–Stefan equations (GMSE) is preferably used because Maxwell–Stefan (M–S) diffusion coefficients are symmetrical and have a clear physical meaning, as they reflect the binary friction forces between compounds in the system. For the calculation of the mass transport of a multicomponent fluid in the polymer basing on GMSE, it is necessary to have M–S diffusion coefficients. This paper proposes a method that allows their calculation using widely available self-diffusion coefficients and binary diffusion coefficients for infinitely diluted mixtures. The proposed method was compared with the me…

Activity coefficientMolar concentrationChemistryDiffusionThermodynamicsFiltration and SeparationMole fractionBiochemistrychemistry.chemical_compoundMaxwell–Stefan diffusionVinyl acetateGeneral Materials ScienceDiffusion; Multicomponent; Polymer; Free volume; Maxwell–StefanPhysical and Theoretical ChemistryTernary operationMass fractionJournal of Membrane Science
researchProduct

Gelchromatographie. 8. Mitt.: Vernetzte copolymere des vinylacetats

1969

Die Eigenschaften von vernetzten Copolymeren des Vinylacetats wurden in Abhangigkeit von den Herstellungsbedingungen gepruft. Als Vernetzungsmittel dienten Divinyladipat und Butandiol-(1.4)-divinylather. Mit homogen-vernetzten Gelen konnen Ausschlusmolekulargewichte bis etwa 4000 erzielt werden: zwischen dem spezifischen Gelbettvolumen und dem Ausschlusmolekulargewicht besteht eine lineare Beziehung. Die heterogen-vernetzende Copolymerisation des Vinylacetats in Gegenwart verschiedener inerter Verdunnungsmittel fuhrt zu Gelen mit Ausschlusmolekulargewichten uber 106. Die vernetzten Copolymeren wurden durch ihre scheinbare Dichte, durch die Aufnahme von Losungs- und Fallungsmitteln, durch di…

Apparent densitychemistry.chemical_compoundLinear relationshipMolecular massChemistryAdipatePolymer chemistryCopolymerVinyl acetatemedicineSwellingmedicine.symptomDie Makromolekulare Chemie
researchProduct

Evaluation of the bending behaviour of laminated glass beams via electronic speckle pattern interferometry

2017

The paper is devoted to the experimental analysis of the kinematical and mechanical behaviour of laminated glass beam structures. In particular, the utilized laminated glass specimens are composed of two glass layers bonded by a polymer layer constituted by Ethylene-vinyl acetate whose thickness has been nominally considered as constant for all the specimens. The experimental behaviour of the analyzed specimens is deduced by applying Electronic Speckle- Pattern Interferometry technique; actually, among optical methods this technique (handled by phase-stepping technique) is very effective to obtain a full-field displacement map and to numerically achieve the longitudinal strain. In particula…

Bending behaviourThin layersMaterials scienceESPIInterlayerGeneral Chemical EngineeringExperimental analysiMechanical EngineeringEthylene-Vinyl Acetate (EVA)Laminated glaMultilayer beamBendingStress (mechanics)InterferometryEquivalent thickneElectronic speckle pattern interferometryModeling and SimulationPure bendingForensic engineeringChemical Engineering (all)Composite materialElectrical and Electronic EngineeringLaminated glassSettore ICAR/08 - Scienza Delle CostruzioniBeam (structure)
researchProduct

Gel chromatography

1968

Abstract The separation efficiency of gel chromatographic columns was investigated under a wide variety of experimental conditions. By use of reduced quantities it is possible to describe the separation efficiency for different gels and experimental conditions by a single equation. Deviations from this equation were found to be caused by an alteration of the diffusion coefficient within the gel with respect to the mobile phase. Factors governing the gel chromatography of p -oligophenylenes on poly(vinyl acetate) and poly(styrene) gels are generalized and discussed.

ChromatographyChemistryDiffusionOrganic ChemistryAnalytical chemistryGeneral MedicineBiochemistryAnalytical ChemistryStyreneGel permeation chromatographychemistry.chemical_compoundPhase (matter)Single equationVinyl acetateJournal of Chromatography A
researchProduct

<title>Proton conducting polymer electrolytes for electrochromic devices</title>

1997

This report concerns a composite proton electrolyte suitable for use in electrochromic devices. The electrolyte consists of nanosize hydrated oxide (aluminum, silicon or antimonic) particles suspended in a poly(vinyl acetate) matrix. All of the water was strongly bonded, thus making the electrolytes less harmful without considerably decreasing the conductivity. The proton conductivity of the electrolyte was approximately 10-4 S/cm at room temperature, practically independent of its amount of absorbed water.© (1997) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.

Conductive polymerchemistry.chemical_classificationMaterials scienceSiliconOxidechemistry.chemical_elementPolymerElectrolyteConductivityElectrochromic deviceschemistry.chemical_compoundchemistryChemical engineeringPolymer chemistryVinyl acetateSPIE Proceedings
researchProduct

Co-deposition and characterization of hydroxyapatite-chitosan and hydroxyapatite-polyvinylacetate coatings on 304 SS for biomedical devices

2019

During the last decades, biomaterials have been deeply studied to fabricate and improve coatings for biomedical devices. Metallic materials, especially in the orthopedic field, represent the most common materials used for different type of devices thanks to their good mechanical properties. Nevertheless, low/medium resistance to corrosion and low osteointegration ability characterizes these materials. To overcome these problems, the use of biocoatings on metals substrate is largely diffused. In fact, biocoatings have a key role to confer biocompatibility features, to inhibit corrosion and thus improve the lifetime of implanted devices. In this work, the attention was focused on Hydroxyapati…

CorrosionChitosanGalvanic depositionOrthopedic implantSettore ING-IND/24 - Principi Di Ingegneria ChimicaSettore ING-IND/23 - Chimica Fisica Applicata304 stainless steelSettore BIO/10 - BiochimicaPolyvinyl acetateSettore ING-IND/34 - Bioingegneria IndustrialeCytocompatibilityHydroxyapatite
researchProduct

Polymer Synthesis in Supercritical Carbon Dioxide

2003

It is current opinion of most of the people involved in supercritical fluids (SCFs) technology that as the end of the twentieth century has been devoted to enlarge exploitation of compressed gases in separation processes the beginning of the twenty-first will be mainly aimed to improve their utilisation as solvents for reactions.

Dispersion polymerizationchemistry.chemical_classificationchemistry.chemical_compoundSupercritical water oxidationMaterials scienceSupercritical carbon dioxidechemistryChemical engineeringVinyl acetatePolymerCurrent (fluid)Supercritical fluidElectrochemical reduction of carbon dioxide
researchProduct

Gelchromatographie, 12. Gelchromatographisches Verhalten von Polyvinylalkoholgelen

1975

Durch Hydrolyse von Copolymeren aus Vinylacetat und 1,4-Bis(vinyloxy)butan werden vernetzte Polyvinylalkoholgele hergestellt und ihre Eignung als hydrophile stationare Phase bei gelchromatographischen Trennungen mit Dextranen, Poly(athylenoxid)en und Proteinen als Testsubstanzen gepruft. Die Gele sind druck- und biostabil und zeigen keine storende Adsorption. Je nach Herstellungsbedingungen werden Ausschlusmolekulargewichte bis zu 106 erzielt. Hydrolysis of copolymers from vinyl acetate and 1,4-bis(vinyloxy)butane results in crosslinked poly(vinyl alcohol) gels. Their applicability as hydrophilic stationary phase in gel permeation chromatography is investigated using dextranes, poly(ethylen…

Gel permeation chromatographychemistry.chemical_compoundVinyl alcoholHydrolysisAdsorptionchemistryEthylene oxidePolymer chemistryVinyl acetateCopolymerHydrophileDie Makromolekulare Chemie
researchProduct

Incorporation of nisin in poly (ethylene-co-vinyl acetate) films by melt processing: a study on the antimicrobial properties

2011

Both industry and academia have shown a growing interest in materials with antimicrobial properties suitable for food packaging applications. In this study, we prepared and characterized thin films of ethylene-co-vinyl acetate (EVA) copolymer with antimicrobial properties. The films were prepared with a film blowing process by incorporating a nisin preparation as an antimicrobial agent in the melt. Two grades of EVA containing 14 and 28% (wt/wt) vinyl acetate (EVA 14 and EVA 28, respectively) and two commercial formulations of nisin with different nominal activities were used. The effect of the nisin concentration also was evaluated. The films with the highest antimicrobial activity were th…

Materials scienceEthyleneTime FactorsFood ContaminationBacterial Physiological PhenomenaMicrobiologychemistry.chemical_compoundBacteriocinotorhinolaryngologic diseasesCopolymerVinyl acetateOrganic chemistryHumansNisinNisinPoly ethyleneDose-Response Relationship DrugFood PackagingTemperatureAntimicrobialAnti-Bacterial AgentsFood packagingchemistryConsumer Product SafetyBiofilmsFood MicrobiologyEVA antimicrobial properties nisin melt processing controlled releasePolyvinylsFood ScienceNuclear chemistry
researchProduct